Introduction to 6061 aluminum rod
6061 aluminum rod is an Al-Mg-Si series heat-treatable aluminum alloy (GB/T 3191), with a tensile strength of >=310MPa in the T6 state, and has both high strength and excellent processability. Its characteristics include: excellent corrosion resistance, weldability and low-temperature toughness (stable performance at -196℃), support for precision machining such as turning and forging, and the surface can be hard anodized (HV>=800). It is widely used in high-strength structural parts such as mechanical spindles, aviation fasteners, and automotive connecting rods, achieving the best balance of strength, cost and reliability in the industrial field.
|
|
6061 |
|
|
F,O,T4,T6,T651 |
|
|
0.2-10.0 |
|
|
100-2650 |
|
|
C |
|
|
|
|
|
Coating, embossing, brushing, polishing, anodizing, etc. |
|
|
|
|
|
|
|
|
|
|
|
As a heat-treated strengthened aluminum alloy, 6061 aluminum rod has excellent comprehensive mechanical properties. Its tensile strength in T6 state can reach 310MPa, yield strength 276MPa, while maintaining an elongation of 8-10%. The material has a hardness of HB95, fatigue strength is 50% higher than that of ordinary aluminum, and has good corrosion resistance (passed 3000 hours of salt spray test). The thermal conductivity of 167W/(m·K) makes it an ideal choice for heat dissipation applications, while the density of 2.7g/cm³ achieves excellent lightweight effect.
We use military-grade packaging standards:
1. A single aluminum rod is fully wrapped with PE film
2. Steel sheath is added to the end
3. Vapor phase rust prevention (VCI) treatment
4. Steel belt reinforced wooden box (ISPM15 certification)
Supports 40-foot container loading (18 tons per cabinet), equipped with temperature and humidity recorder. Establish three logistics centers in Europe, North America and Southeast Asia to ensure that goods arrive at major ports around the world within 20 days. Annual export volume exceeds 50,000 tons, with a damage rate of <0.03%.
1
2
3
CNC turning (accuracy ±0.01mm)
Deep hole drilling (length-to-diameter ratio 30:1)
- Hard anodizing (film thickness 50-100μm)
- Micro-arc oxidation (hardness HV1200)
- Cold forging (deformation >=70%)
- Spinning (wall thickness tolerance ±0.1mm)
High-end application areas
- Aerospace: Aircraft structural parts (NADCAP certification)
- Automotive industry: Suspension components (weight reduction 35%)
- Machinery manufacturing: Hydraulic cylinder (pressure resistance 50MPa)
- Mold industry: Injection mold core (life increased by 3 times)
- Ultra-high vacuum requirements (<5×10⁻⁸Pa)
- Low outgassing characteristics (ASTM E595 standard)
- Full range of specifications from 10 to 300 mm in diameter
- Special alloy development (such as 6061-T651)
- Precision sawing (length tolerance ±0.5 mm)
01
Value-added processing
- Heat treatment (aging furnace temperature control ±1.5℃)
- Surface treatment (anodizing/sandblasting, etc.)
- Machining (CNC turning and milling composite)
02
- Professional anti-rust packaging
- Direct delivery from overseas warehouses (Germany/USA/Japan)
- Multiple trade terms such as DDP/DAP
03
- Material selection consultation
- Processing technology guidance
- Multi-language (English/Japanese/German) services
04
- Provide EN 754/ASTM B221 certification
- Complete material report (spectral analysis + mechanical properties)
- PPAP file package (level 3)
05
We use the ERP system to track the entire order process and ensure on-time delivery rate > 99%. We have established long-term cooperation with Fortune 500 companies, with an annual export volume of over 80,000 tons, and can provide JIT just-in-time supply services.
Tag: 6061 aluminum rod, China 6061 aluminum rod manufacturers, factory
